Our Products


  • PTFE LINED PIPE

    PTFE LINED PIPE

     

    1. ALL DIMENSIONS ARE IN mm
    2. PIPE: ANSI B 36.10, ASTM A 106 GR. B Sch.40
    UPTO 150NB & 200NB ONWARDS MIN. Sch. 20
    450NB & ABOVE Sch. PIPE AS ABOVE OR WELDED
    3. FLANGE : ANSI B 16.5, ASA 150#, IS 2062 Gr. A
    4. LINER : ASTM D 1457 TYPE - III, PTFE
    5. THE TOLERANCES ON LENGTH OF PIPING WILL BE ±3.2
    6. LINING & OTHER DIMENSIONAL TOLERANCES AS PER ASTM F 1545-95/ ASTM D 1457 TYPE III
    7. OTHER SPECIFICATIONS /DIMENSIONS / VACUUM SERVICE AVAILABLE ON REQUEST
    8.P = G-2mm, J = 0.8G

     

  • PTFE LINED 90° - 45° ELBOW

    PTFE LINED 90°  - 45°  ELBOW
    PTFE LINED 90°  - 45°  ELBOW

     

    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PRFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    ELBOW BODY: ASTM A 234 Gr. WPB
    FLANCE: ANSI B 16.5, ASA 150#, IS 2062 Gr.A
    LINER: PTFE, ASTM D 1457 TYPE III, / PFA, ASTM D 3307, PFA LINER THK. ‘S’ = MINIMUM 3.0 mm

     

  • PTFE / PFA / FEP LINED EQUAL TEE

    PTFE / PFA / FEP LINED EQUAL TEE

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    EQ. TEE & RED. TEE BODY: CAST IRON / S.G. IRON DUCTILE IRON CASTING AS PER ASTM A 216 / ASTM A 395 & DIMENSIONAL STANDARD AS PER ASME BNSI B 36.10, ASTM A 106Gr. B (WELDED ASSEMBLY)
    FLANGE: DRILLED TO ANSI B 16.5, ASA 150
    LINER: PTFE, ASTM D 1457 TYPE III / PFA, ASTM D 3307, PFA LINER THK, ‘S’ = MINIMUM 3.0 MM / FEP, ASTM D 2116, FEP LINER THK. ‘S’ = Minimum 3.0mm

     

  • PTFE LINED EQUAL TEE / UN EQUAL TEE / CROSS TEE+

    PTFE LINED EQUAL TEE / UN EQUAL TEE / CROSS TEE+

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN UDRG. NO.
    3. MATERIAL CONSTRUCTION:
    EQ. TEE & EQ. CROSS BODY (PIPE): ANSI B 36.10, ASTM A 106 Gr.B
    FLANGE: ANSI B 16.5, ASA 150#, IS 2062 Gr. A
    LINER: ASTM D 1457 TYPE III, PTFE

     

  • PTFE / PFA / FEP LINED CROSS

    PTFE / PFA / FEP LINED CROSS

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN UDRG. NO.
    3. MATERIAL CONSTRUCTION:
    EQ. TEE & EQ. CROSS BODY (PIPE): ANSI B 36.10, ASTM A 106 Gr.B
    FLANGE: ANSI B 16.5, ASA 150#, IS 2062 Gr. A
    LINER: ASTM D 1457 TYPE III, PTFE

     

  • PFA / PTFE / FEP LINED ECC. REDUCER & REDUCING FLG.

    PFA / PTFE / FEP LINED ECC. REDUCER & REDUCING FLG.

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    RED. FLG. BODY IS 2062 Gr.A
    RED. BODY CAST IRON / S.G. IRON / DUCTILE IRON CASTING AS PER ASTM A 216 / ASTM A 395 & DIMENSIONAL STANDARD AS PER ASME B 16.42-1998 OF ASTM A 234 Fr. WPB (WELDED CONSTRUCTION)
    FLANGE: DRILLED TO ANSI B 16.5, ASA 150#
    LINER: PTFE, ASTM D 1457 TYPE III / PFA, ASTM D 3307, PFA LINER THK. ‘S’ = MINIMUM 3.0 mm / FEP, ASTM D 2116, FEP LINER THK. ‘S’ = MINIMUM 3.0 mm

     

  • PTFE / PFA / FEP LINED CONCENTRIC REDUCER

    PTFE / PFA / FEP LINED CONCENTRIC REDUCER

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN UDRG. NO.
    3. MATERIAL CONSTRUCTION:
    RED. BODY ASTM A 234 Gr. WPB. FLANGE: ANSI B 16.5, ASA 150#, IS 2062 Gr.A
    LINER: ASTM D 1457 TYPE III, PTFE

     

  • PFA / FEP / PTFE LINED REDUCING FLANGE

    PFA / FEP / PTFE LINED REDUCING FLANGE

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    RED. BODY CAST IRON / S.G. IRON / DUCTILE IRON CASTING A S P E R ASTM A 216 / ASTM A 395 & DIMENSIONAL STANDARD AS PER ASME B 16.42-1998 OF ASTM A 234 Fr. WPB (WELDED CONSTRUCTION) FLANGE: DRILLED TO ANSI B 16.5, ASA 150#
    LINER: PTFE, ASTM D 1457 TYPE III / PFA, ASTM D 3307, PFA LINER THK. ‘S’ = MINIMUM 3.0 mm / FEP, ASTM D 2116, FEP LINER THK. ‘S’ = MINIMUM 3.0 mm

     

  • PTFE BELLOWS

    PTFE BELLOWS

     



    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. FLANGE CONNECTION S ACC. TO ANSI B 16.5, ASA 150#, IS 2062 Gr.A
    4. THE FIGURES FOR COMPENSATION rX AS SHOWN ABOVE DO NOT APPLY TO LATERAL OR ANGULAR INSTALLATION AT THE SAME TIME
    5. LINER: ASTM D 1457 TYPE III, PTFE
    6. THE MINIMUM FLARE DIAMETER WILL BE 0.95 c
    7. OTHER SPECIFICATIONS / DIMENSIONS / VACUUM SERVICE AVAILABLE ON REQUEST

     

  • SIGHT FLOW INDICATOR-DOUBLE WINDOW / FULL VIEW

    SIGHT FLOW INDICATOR-DOUBLE WINDOW / FULL VIEW
    SIGHT FLOW INDICATOR-DOUBLE WINDOW / FULL VIEW

     

    SPECIFICATIONS:

    STEEL FRAME: ASTM A234 GRADE WPB, IN COMPLIANCE WITH ANSI B 16.28
    STEL SIGHT GLASS PIECE: ACCORDING TO SCH 40.
    FLANGE: ASTM A105, IN COMLIANCE WITH ANSI B16.5/CLASS 150IBS; JIS 10K OR DIN IS ALSO AVAILABLE ON REQUEST
    STANDARD: TWO FIXED FLAGES; ONE LOOSE AND ONE FIXED FLANGES OR TWO LOOSE FLANGES ARE ON REQUEST
    LINING: PURE PTFE IN COMPLIANCE WITH ASTM D 1457
    GLASSES: PRESS GLASS AND FEP FILM LINED. OTHER NOMINAL SIZES ARE AVAILABLE ON REQUEST

     

  • SOLIED SPACER

    SOLIED SPACER

     



    MATERIAL:

    Pure PTFE in compliance with ASTM D 1457. Other nominal sizes are available on request

     

  • PTFE / PFA / FEP LINED BLIND FLANGE

    PTFE / PFA / FEP LINED BLIND FLANGE
    PTFE / PFA / FEP LINED BLIND FLANGE

     


    FLANGE: ASTM A 105, in compliance with ANSI B 16.5/Class 150Ibs; JIS 10k or DIN is also available on request
    MATERIAL: ASTM A 105, in compliance with ANSI B 16.5/Class 150Ibs; JIS 10k or DIN is also available on request Pure PTFE in compliance with ASTM D 1457. +Other nominal sizes are available on request

     

  • VALVES

    VALVES
    VALVES
    VALVES
    VALVES

     

    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    BODY S.G.IRON / CARBON STEEL FLANCE: ANSI B 16.5, ASA 150#
    LINER: FEP / PFA / PTFE

     

  • HOSE

    HOSE
    HOSE
    HOSE

     

    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    END FITTINGS SS 304 L/SS 316 Crimped on hose FLANCE: ANSI B 16.5, ASA 150#, SS 304 L/SS 316/ ASTM A/105/IS2062 Gr. A
    LINER: ASTM D 1457 TYPE - III, PTFE

     

  • DIP PIPE / ANTI STASTIC / CONDUCTIVITY DIP PIPES++

    DIP PIPE / ANTI STASTIC / CONDUCTIVITY DIP PIPES++
    DIP PIPE / ANTI STASTIC / CONDUCTIVITY DIP PIPES++
    DIP PIPE / ANTI STASTIC / CONDUCTIVITY DIP PIPES++
    DIP PIPE / ANTI STASTIC / CONDUCTIVITY DIP PIPES++

     

    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    PIPE: ANSI B 36.10, ASTM A 106 Gr. B Sch. 40 FLANCE: ANSI B 16.5, ASA 150#, IS 2062 Gr. A
    LINER: ASTM D 1457 TYPE - III, PTFE

     

  • PTFE / LINED COLUMN

    PTFE / LINED COLUMN

     

    NOTE: *LENGTH SUITABLE FOR CLIENT REQUIREMENT DEPENDING ON NOMINAL BORE

    SPECIFICATIONS:

    1. ALL DIMENSIONS ARE IN mm
    2. OTHER DIMENSIONS & SPECIFICATIONS ARE AS GIVEN IN PTFE LINED PIPE DRAWING
    3. MATERIAL CONSTRUCTION:
    PIPE: ANSI B 36.10, ASTM A 106 Gr. B Sch. 40 UPTO 150 NB FOR 600 NB 8MM thk. IS 2062 PLATE, WITH SPOT WELD X RAY FLANCE: ANSI B 16.5, ASA 150#, IS 2062 Gr.A / ASTM A 105
    LINER: PTFE (THK. 5mm to 6mm)

     

INQUIRY NOW !

LOOKING FOR A BUSINESS INQUIRY OR GET A FREE PRODUCT QUOTE ?

About Us

We commenced our journey in the field of Flora polymers in 1998 with compression molding of PTFE, manufacturing stock shapes like rods, bushes, sheets e.t.c from granular resins.

INQUIRY NOW!

Quick Contact us !

Address :
Plot No. 54/4, Phase-1, IDA., Jeedimetla, Hyderabad, 500055, Telangana, INDIA.
Phone: +91 9848670098
Email: info@higenicflorapolymers.in